Glass Bottle Cutter: Basic Tutorial and Product Reviews
You may have seen a bunch of DIY projects popping upwards online lately involving drinking glass bottle cutting. I volition exist the commencement to admit that I was hesitant to try this DIY method because cutting glass just seems then, I don't know, messy and risky.
The reviews I've read accept been all over the place, from people claiming the procedure couldn't be easier to others illustrating how canteen cut simply can't be washed well.
To see for myself, I ordered iv glass canteen cutter kits online and volition review the process of using them for you lot in this tutorial. I'll testify yous how to brand a drinking glass, a flower vase, a parfait bowl, and a candle cover.
Materials Needed:
- Glass bottles (lots and lots)
- Emery sanding paper
- Boiling water (recommended in tea kettle or easy-to-cascade canteen)
- Ice water bath
- Silicone oven hand/glove (optional, but highly recommended)
- Goof off (optional, only highly recommended)
*Warnings: This projection involves cutting glass, very hot water and tiny glass pieces.
How To Clean The Bottles Before The Cutting
Begin by removing all paper and gum from your bottles. (I didn't necessarily do this, equally y'all'll come across in some of the tutorial photos, and I discovered information technology'due south much easier to do initially.) Soak the paper labels nether hot water.
Remove as much of the paper and glue equally y'all can with your fingernail or a scraper of some sort.
For especially sticky glue bits, I highly recommend using an adhesive remover such as Goof Off.
Pour a little bit on a disposable rag, and rub at the glue until it'southward gone.
You can see here the drinking glass is clear after but a few seconds of rubbing. If you use Goof Off, information technology's best to remove all newspaper get-go with a scraper before applying Goof Off.
Glass Bottle Cutter Reviews:
1. AceList Long Drinking glass Bottle Cutter Motorcar
View in gallery Bottle Cutter 4: AceList – available hither.
With this bottle cutter, I made a candle cover. These would exist perfect for wedding centerpieces or front porch or patio décor in the summer evenings.
I had high hopes for the Ace Listing bottle cutter. What a cute aqua colour for the base of operations! Information technology's very similar in layout to the Genround and AceList, with a wing nut adjustment for the length of the bottle cut.
After the length and scoring blade have been adjusted to your liking, score the bottle pressing firmly only gently downward and keeping the canteen secure against the base while you lot rotate it with 2 easily.
This score line looks a petty deep, but we'll give it a try.
Grip the part of the bottle that you're to the lowest degree likely to keep as you rotate information technology under the nearly boiling h2o and then the icy cold h2o.
Yep, this particular bottle's score line was too deep. Y'all don't need information technology that intense; I was pressing too difficult on this one. Lighten upwards a bit to guide the break, just don't endeavor to forcefulness the interruption with the scoring blade. That's the hot/cold water'southward chore.
At least nosotros got a cute candle cover out of information technology. Of course, this shows an LED tea light candle, but the beauty of using a bottle pinnacle for the candle cover is to let air in and out for a real burning candle. There is so much potential for this decoration.
Canteen Cutter iv: AceList – available here.
View in gallery 2. Genround Glass Bottle Cutter
View in gallery Bottle Cutter 2: Genround – available here.
With this bottle cutter, I fabricated the clear blossom vase shown earlier and a drinking glass. I honey the proportion of this drinking glass (fabricated from a Snapple bottle).
The Genround bottle cutter has three rollers and a scoring bract on a metal plate. Besides straightforward.
You can adjust two of the rollers to accommodate various bottle diameters past loosening with the hex wrench (provided in the kid), sliding in place, then tightening again.
The hex wrench can as well be used to identify the scoring blade precisely where you desire it.
Afterwards adjusting, you can see here that the scoring blade just touches the glass. That's all you need.
Rotate the glass evenly and smoothly, with fifty-fifty pressure and speed.
Here you can see the score line on the Snapple bottle.
Alternating most humid water with about ice water, poured directly onto the rotating bottle's score line, this bottle split beautifully.
This bottom section only needs a little sanding to go a decent glass.
And here information technology is. Lovely!
Canteen Cutter two: Genround – available here.
3. LANMU Bottle Cutter
View in gallery Bottle Cutter i: Lanmu – available here.
With the Lanmu bottle cutter, I made a glass bloom vase. Pretty elementary, and the green glass is quite lovely next to flora and leafage, don't you lot think?
When you open up the Lanmu bottle cutter, this is what yous'll observe. The acrylic cutter has curves that back up and accommodate the curves of a glass bottle. You will probably need to adjust the back supports by spinning the fly nuts (take intendance to proceed the supports precisely level) depending on the length of your bottle.
Place your bottle on the bottle cutter. If the scoring blade doesn't touch the glass, y'all'll demand to arrange that next.
Adjusting the Lanmu scoring blade is pretty straightforward – loosen the screw that holds the blade in identify, then drop information technology downwards to the next screw hole and supersede the screw.
Tighten the screw dorsum upwardly with a screwdriver (provided in the kit).
As you can see, the scoring blade at present touches the glass, and then your bottle is gear up to be scored.
(Notation: Because the score line hitting above the paper and glue on this canteen, I didn't scrub information technology make clean prior to cut here. I would recommend scrubbing any newspaper and gum off prior to scoring; I'll show the best methods for that afterwards in this tutorial.) Press gently but firmly down on the bottle, rotating it only once around to create a complete score.
In theory, a single score line (every bit in, one that is non repeated around and around the bottle) is likely to produce a cleaner suspension.
For all drinking glass bottle cutter processes shown in this tutorial, I use the heating-and-cooling method. This involves heating water to simply beneath its boiling indicate.
Ready a large bowl or sink with water ice common cold water. I found that placing ice packs into the water kept it squeamish and common cold, and so I would dip a measuring cup into the sink water to pour over the score line. If you lot have the luxury of a double sink, place an old towel in the bottom of the second sink so the glass doesn't intermission when it falls.
Rotating the canteen quickly and evenly (while wearing a silicone oven mitt, recommended), slowly pour a chip of hot h2o directly onto the score line.
And so quickly either place the bottle into the ice bath or pour ice water directly over the score line. Echo this hot water/ice water dorsum-and-along until the drinking glass breaks.
This glass broke adequately well, merely non perfectly. I think we can sand that downwardly a bit.
Lay out the emery paper that came with your Lanmu bottle cutter, and throw a few drops of h2o down on it. Place the cut line down on the paper, and brainstorm sanding it smooth.
You can also use smaller bits of emery newspaper, dry, to shave off troublesome bits. Go on in mind that glass doesn't sand all that hands; if your edge is too rough or wavy, it would be all-time to scrap that bottle and try once again with a fresh one.
This canteen bottom looks pretty great after sanding down!
It became a drinking glass bloom vase. Nice!
Bottle Cutter one: Lanmu – available here.
four. AGPtek Blackness Glass Canteen Cutter
View in gallery Canteen Cutter 3: AGP Tek – available here.
Such a cute little parfait bowl from the top of a Snapple bottle (with the lid screwed on tight).
This canteen cutter was identical – down to the terminal hex nut – to the Genround bottle cutter.
And so, follow the instructions for Genround. Shine out the cut edge very very carefully with your emery paper. And then, with the height half of your cut canteen, screw the chapeau back on very tight. You could apply some superglue if yous want.
Wash with hot soapy water, so fill up with the parfait, ice cream, or pudding treat of your choice. Savor!
Bottle Cutter 3: AGP Tek – available here.
Drinking glass Canteen Cutting Projects
Hither are the 4 drinking glass bottle cutter projects.
I think each turned out and so pretty in its own manner.
There's something charmingly sensual about a cut glass bottle.
It makes an everyday detail seem that much more than boggling.
Alarm
It would be doing you all a great disservice if I didn't admit that, when glass canteen cutting works it is awesome, but when information technology doesn't it is quite frustrating. There were many many "outtakes" during the course of this tutorial.
For some reason, the score line didn't hold, and the drinking glass pause went manner off.
Occasionally the glass "mountained" and other times information technology "crevassed."
I recommend having more than glass bottles than you really need on-hand, considering chances are yous're going to run into plenty of bloopers as you perfect this process.
Unfortunately, I couldn't get any of these cute glass bottles to suspension well. I thought the tops would make such cute ice cream sundae / parfait bowls.
Once the glass has broken, whether information technology'south on the score line or not, I found it impossible to get it to break over again. I tried the hot/cold method on a score line subsequently a weird interruption line went style off course, but it didn't pause.Most of the time, the glass seemed like information technology would be cleaved perfectly only at the last minute would do something crazy over merely one little section of the score line.
If you come across a crack form during the hot/cold water method that doesn't flow along your score line, you tin can go ahead and end the process right there. It's a goner.
At least the goners are in skillful visitor…
Ultimately, my verdict is this: glass bottle cut isn't incredibly easy, it tin be quite frustrating, just it can also exist super rewarding when it works.
Source: https://www.homedit.com/bottle-cutter/
0 Response to "Glass Bottle Cutter: Basic Tutorial and Product Reviews"
Post a Comment